Filter Element Characteristics
1. The air permeability of the precision Filter Element: the filter element adopts a strong hydrophobic and oleophobic
fiber filter material, and at the same time adopts a stainless
steel support net with good permeability and high strength to
reduce the resistance caused by passing.
2. High efficiency of precision Air Filter Element: The filter element uses precision sodium borosilicate glass fiber,
filter paper and non-woven fabric, which can effectively prevent
oil and water from being entrained by high-speed airflow. The fine
oil droplets gather at the lower end of the Compressed Air Filter Element and discharge to the bottom of the filter container.
3. The air tightness of the precision fiber glass filter element: The connection point of the filter element and the filter housing
adopts a reliable perfluorinated sealing ring to ensure that the
air flow is not short-circuited and prevent impurities from
directly entering the downstream without passing through the filter
element.
4. Anti-corrosion of precision filter element: The filter element adopts anti-corrosion PA+GF end cap, under
1.8Mpa pressure, it can withstand high temperature of 240℃ without deformation and -20℃ without embrittlement. The double-layer stainless steel support net
can prevent general acid and alkali chemical corrosion and can be
used in harsh working conditions.
The main principle of the filter element is also the main principle
of the filter. It is the purification equipment needed to purify
the original ecological resources and the reuse of resources. The
filter element is generally mainly used in filtration industries
such as oil filtration, water filtration, and air filtration.
Removal of a small amount of impurities in the filter medium can
protect the normal operation of the equipment or the cleanness of
the air. When the fluid passes through the filter element with a
certain precision in the filter, its impurities are blocked, and
the clean fluid flows out through the filter element.
The filter element can purify the contaminated medium to achieve
the clean state required for production and have a certain degree
of cleanliness. The filter element is used in a wide range, such as
steel smelting, power production, food and beverage, etc.
Customer Benefits
① Long spanlife under rate working conditions.
② Filtration performance up to 0.01micron and residual oil up to
0.001mg/m³ in according with ISO8573.1-2010 standard.
③ Low pressure drop, saving energy and cost for ownership.
④ Colorful element top cap, Spin-on for filter, easy operate and
maintain.
Element Technical Specification
Detail of Element
